There are three primary stone finishes, polished, honed and flamed. In addition there are many others available. The following content works through these finishes to provide you with informative detail of this enlightening topic. What stone finishes are available?
A polished finish displays glossy surface that reflects light and emphasizes the colour and markings of product. It is created by buffing the surface of your stone until it reaches its most refined cycle. The surface pores become sealed, making the stone nearly impervious to weather and chemical wear.
A honed finish is often a satin-smooth surface which shows the full colour of the stone with relatively little reflection of light. This is the same procedure employed to polish, but the honing process ends before the buffing stage. Generally, a honed finish is preferred for floors, stair treads, thresholds, and other locations where heavy traffic will wear off the polished finish. A honed finish may also be employed on furniture tops and other surfaces.
A flamed finish is produced when an intense flame is fired at the stone, causing top to burst and become rough. Cool water is applied equally well. It is used frequently on granite tiled floors, where slip-resistance is extremely important. It cannot be applied to all stone, most granite and certain hard limestone greatest suited.
A leathered finish is the associated with texturing granite or marble to appear less glossy. This process amplifies the natural characteristics of granite or marble, inducing an exquisite flat surface. It is easy totally clean and maintain, also as, pleasing on the touch; a perfect balance between style and practicality.
In sandblasting, a high-pressure jet of siliceous sand or steel shots is used to the area to be fixed. This treatment produces an easy abrasion, leaving the material with a slightly scratched (but not rugged) surface. This dulls the colour, tones and veins.
Splitface finish is often a result of stone being cut along with a guillotine, fracturing the face of the stone turning it to produce rocky look. It is a rugged, uneven, concave-convex finish that reveals reflections originating from a crystals.
Rigato is equipment finish that provides a linear pattern cut to the normal. This finish gives another design factor when applied to a wall. All stones can have this finish applied to them.
Natural Cleft is a conclusion is related to materials will be layered and thus, when split, accomplish that on a healthy fault creating what is thought as an organic cleft finish. Slates are one of the most common varieties of stone just take split without drugs.
A flamed and brushed finish is obtained by passing a blowpipe that emits a high-temperature over the surface, which blows the crystals out due to the fact suffer thermal shock, through effect the actual particularly good on the vast majority of granites. The resulting surface is rough, non-slip and usually faded in colour, hiding defects and tone variations. Due to oxidation, yellow materials become red or pink.
A bush-hammered finish is produced with specialized stone-working hammer along with a head that resembles a meat tenderizing hammer. Given that the head from the hammer is frequently small (about 1-2 inches square) it takes a an eternity to apply this finish to a good sized surface place. The result leaves the surface of the stone fairly smooth with small indentations. This finish can be applied to nearly all brick.
The sheer array of finishes available for stone tiles show the individuality that can be created through tailored artwork. Your stone floor restoration specialist will be able to offer valued information and advice that will produce a stone finish that is best-suited your individual circumstances.
Prestige Stone Restoration
+61 408 717 883
Gold Coast QLD, Australia